Butterfly Zyre 03
Submit a Review
Reviews
#1 — October 2026
Played 2.7 black on Joola Zelebro, ZQH90, 5-ply rosewood, FZD ALC. Price is high. Spin potential is high. Needs sponge engagement and short stroke, so this is rewarding to faster-stroke players on harder/stiffer blades. Softer and slower blades allow for more gears and control on stronger shots and counters. I found it best to play on FH of FZD ALC.
Looping—requires sponge engagement—magic when it goes, hard to brush sometimes. Best oriented towards loop drivers like using Fastarc G-1 or Victas Ventus. Easier to open than 09 °C and T05. Backspin doesn’t have much impact on the rubber when you decide to topspin.
Counter—magic and plays fast and sharp and requires no major backswing to keep pace going. Better than T05 or D05 in that regard.
Short game—if you can only engage topsheet on short game, it’s very similar to Fastarc G-1.
Serving—very similar to Chinese rubber if you can brush topsheet only. Ability to stay short is player-dependent, but I found it easier than Dignics 05 on short game. 09 °C is slightly stronger on more aggressive short game like pushes or outright spin.
Major pros—great base speed and spin, good control for said speed and spin. Easy to punch and drive while allowing an ability to flip anything into topspin.
Major cons—extreme rebound on passive shots when someone is aggressive, similar to Hurricane rubbers. Beware sponge engagement on passive shots when someone else is giving strong spin and power.
Overall, an upgrade to a G-1-style player with more spin, speed, and nearly the same control. Also lighter at max thickness on a 157×150 blade; at 2.7 max, it was 46.5 grams. Nearly 3–4 grams lighter than an 09 °C of the same thickness total.
#2 — October 2026
I tested a black ZYRE-03 on a Butterfly Franziska Innerforce ZLC, with Dignics 80 on the other side. That gave me a useful direct comparison on the same blade.
My first thought was rather unexpected: this feels like a Tenergy 25 on steroids. The throw angle is extremely high. The difference is that, while Tenergy 25 always felt somewhat sluggish to me and was mainly suited to aggressive close-to-the-table play, ZYRE-03 has the speed of a modern high-performance tensor. It has enough power to play from mid-distance without feeling limited.
The catapult is extremely strong, but also surprisingly consistent. Rather than wondering when it will kick in, I feel that it is practically always there. In that sense, the rubber is more predictable than I expected.
Unfortunately, predictable catapult does not automatically mean easy control. ZYRE-03 has an extremely demanding throw angle and is very sensitive to both racket angle and incoming spin. The ball seems to leave the racket immediately, so there is very little room to correct a less-than-perfect contact.
The difference was obvious when I first tried the setup. I started on the Dignics 80 side, looping and counterlooping comfortably without mistakes. Then I turned the racket around to ZYRE-03, and my first counterloops went roughly a metre (3 feet) beyond the table. That is how dramatic the adjustment felt to me.
I have said before that Tenergy 05 requires good technique and high-quality contact. For my level, I would describe that as needing something like an 80% quality stroke to execute the more difficult attacks reliably. With ZYRE-03, it feels closer to 95%. Of course these are not measurements; they are my way of describing how narrow the margin for error feels. You almost have to execute textbook strokes every single time. Its speed and spin potential are remarkable, but the rubber seems to amplify mistakes just as efficiently as it amplifies good strokes.
#3 — September 2026
Zyre 03 — First Impressions (Summary) Setup: Yasaka Atletico Spin Pro with Zyre 03 (2.7 mm FH / 2.5 mm BH), previously using Xuperman Powerplay-X.
Service: Similar to the Powerplay-X. Allows short or long serves with great spin without major adjustments. Very comfortable feel.
Service Receive: A bit more bouncy. Requires attention to racket angle and a relaxed grip. On very short balls, a lazy touch makes the ball fly off fast.
Forehand: The highlight of the test! Accessible speed, great spin generation, and high confidence for attacking or blocking without fear of going long. Good comfort and power from mid-distance when putting effort into the stroke. (Note: Not a magic rubber; shot quality depends entirely on your technique and power).
Backhand: Needed a slight adjustment. I tend to lift the ball; with the Zyre 03, it went too high until I closed the racket angle and hit more forward. Afterward, it delivered great speed, spin, and attacking confidence.
Thickness (2.7 mm vs 2.5 mm): Haven’t swapped them yet, so I cannot compare the differences between the two thicknesses just yet.
Overall Feeling: Surprisingly natural and soft despite its hard sponge. Very comfortable from the first session with no slipping issues on the blade.
Durability: Too early to report (only 2 hours of testing so far).
#4 — July 2026
I’ve been using the Zyre 03 2.5mm for backhand (Red) for a while now. I am a technical player and play various aggressive backhand styles/techniques. This is a fast rubber, so you must have the ability to combine force and friction to compress the sponge to create dwell time/grip, as this rubber is not tacky to do that for you (note this is an advanced/pro skill—most club/amateurs struggle). Without this ability, you will not be able to realize the true rubber advantages, and it is useless for you. This rubber is amazing for backhand blocking and fast banana flicks. The Zyre 03 topsheet is very smooth (non-tacky) and it is durable as advertised—after nearly several months of use, the topsheet still looks new (like the G1), an advantage if you want to have this as a long-term rubber.
I have tested the 2.5mm Zyre 03 with the Nittaku Fastarc G1 (2mm) as I have this as my FH rubber to compare. My findings (feeling) with complete forehand loops and forehand drive strokes: Nittaku G1 offers noticeably more in terms of spin, arc, and power due to its better and grippier topsheet, and it still plays very, very similarly to the Zyre 03. Both excel in the close-to-mid distance and are both lightweight.
Cut Weight: 2.5mm Zyre 03 = 45g 2.0mm Super thick Nittaku G1 = 46g
Of course, I am using the 2.5mm version, not the 2.7mm. But I firmly believe the MAX thickness size Nittaku G1 would play better than 2.7mm Zyre 03 in topspin-to-topspin rallies, etc., and do what the Zyre 03 is capable of.
This is an honest review and I made this review only using full strokes and techniques. Do not fall for marketing tactics that aim to make it seem like this is the best rubber out there, as there are better comparable/similar products.
This rubber is designed for top-level play, as it is changing drastically with players playing faster, stronger backhands and closer to the table. Without proper technique and power, this rubber is honestly 8.6/10.
#5 — June 2026
I never thought it would be able to justify its 90 euro price tag, but it does…. It’s really a special rubber. I use it on forehand and can recommend it only there.
#6 — April 2026
My rating in the US is around 1800-1900. I switched from 09 °C, so I use the comparison between these two to explain my evaluation of this rubber better.
I’ve been playing with Zyre03 (2.7mm) for around 6 months now (on a XIOM AJH TMXi Pro blade), and it’s definitely the best FH rubber I’ve ever had in my life—maybe because it fits my playing style pretty well. It’s very forgiving in forehand top spins; it also has a very satisfying balance between speed and spin. In terms of opening attacks on my FH, Zyre03 does a pretty good job and gives you the confidence you need to start the attack, especially against downspin (although not as safe and spinny as 09 °C).
Compared to 09 °C, Zyre03 is way easier to get used to (for my level); playing with it feels so natural, and top spins are honestly effortless (it’s still different from the Tenergy family, so expect a couple weeks for the learning curve if it’s the case for you). Zyre03 also does a pretty good job in flat hits and smashes (of course, not as good as the Tenergy family), while flat hits with 09 °C are a real pain.
I also feel like serving and receiving were a little better with 09 °C, as the ball stays on the rubber surface a little longer and gives you a little more time to generate more spin. My reverse serves have always been my strength, but I can clearly see that my reverse serves with Zyre03 are not as good as with 09 °C.
I cannot comment on flicks and counters, as I do not use them a lot in my game. Blocking with Zyre03 feels very good, though (I’d say it’s easier than 09 °C).
Zyre03 is definitely at least two times more durable than Tenergy 05, and maybe 15-25% more durable than 09 °C. I use Tibhar MX-P on my BH, and it isn’t even half as durable as Zyre03. I play 5–8 hours a week, and after 6 months, the quality is dropping.
Lastly, this rubber is on the heavier side, not the heaviest though (67g uncut for 2.5mm), so it’s something to keep in mind if you’re matching this with a heavy blade.
#7 — February 2026
After using Zyre 03, my impression is that it’s a very fast, spin-heavy rubber made for aggressive attacking play. It feels especially good for mid-distance looping and counterlooping, with a strong catapult effect, high arc, and a lot of power once you engage the sponge fully.
What I liked most was how dangerous it felt on active topspin shots. Opening loops against backspin were very strong, and counterlooping against heavy topspin felt especially solid. From mid-distance, the ball carries deep with plenty of kick, and full attacking shots on both forehand and backhand feel very powerful and crisp.
The main drawback for me was the short game. Because it’s quite bouncy and sensitive to incoming spin, passive blocks, touch shots, and short pushes took more effort to control. If my racket angle wasn’t right, the ball could easily go long.
In terms of feel, it comes across as hard, firm, and crisp, with clear feedback on attacking shots. I think it works best with an inner carbon or all-wood blade to keep the setup more manageable.
Overall, I’d say Zyre 03 is a great option for advanced offensive players who want maximum spin, arc, and power, but it’s definitely not the easiest rubber to control.
Also, I got some information about the rubber from here: https://pingponglab.com/?left=Butterfly+Zyre+03
#8 — November 2025
This rubber is a game changer—every forehand seems to just go on as you imagine it. Its max speed is incredible, but it still has incredible control. The only problem I have had with it is not getting a clean contact when doing a reverse pendulum serve; this is probably because I learned this serve using Tenergy 05 Hard where every ball flies off the rubber more. Everything else feels perfect!
EDIT: After using it for a few weeks, the rubber feels far different than when it started: throw angle has gotten lower, less spin, less control, etc. Some of it might be the fact that I might not be good enough yet to use it on a SZLC blade, but nevertheless I am now considering changing it as it has negatively affected my playing. Overall, I don’t think Zyre justifies the £90 price tag—Dignics 05 and Tenergy 05H both feel a lot better to me.
#9 — October 2025
Blade: Harimoto SALC (inner) (90g) + Z03 2.7 red + D05 2.1 b; this is a great setup. Fast, spinny, high arc. D09C was slow on FH (not boosted). Z03 is light, and has a super grip on BH for chiquita, opening spin, good feeling, and good control for counter or block. It works also on FH for sharp drive and mid-distance. Throw angle is like T05, but feeling is like D05 with a higher arc, and lands on the table like D80 with the amount of spin of D09C. The amount of backspin for serve or push is amazing. The amount of spin causes trouble to blockers.
I tried Z03 on Donic ZJ Original Carbon (outer), Viscaria SALC (outer), and Amultart (hinoki-ZLC), but the trajectory goes too long. The price is expensive, but the quality is top level, and the weight is around 47~48g for 2.7mm = standard 2.1mm.
#10 — October 2025
First of all, there is a review that says this rubber is medium soft; that is not true at all, this rubber is very hard. I think the reason they wrote this was maybe because it has a Butterfly hardness of 44 degrees, which on the ESN rubber hardness scale is about medium. However, Butterfly has their own scale like Double Happiness. After use, I can confirm that this rubber is very hard. I personally think this rubber has to be boosted to get the most out of it, otherwise it’s a pointless rubber to buy. The reason is you can’t fully activate the sponge without booster because the sponge is so hard. It’s actually around the 55 degrees hardness on the ESN scale, which to give context, Fastarc G-1 is around 47.5 degrees, so the Zyre 03 is much harder. It’s not overly fast in my opinion; I used it on a 7-ply all-wood blade (Septear by Nittaku), which isn’t that slow of a blade. I used the 2.5mm on forehand (black) and it’s very spinny unboosted. I haven’t yet played with it boosted, but I can imagine the spin is going to be insane. Pushing with this rubber is trash because it’s too hard (another reason it should be boosted). Serving was okay, but again it was too hard to generate lots of spin; the only time you can get lots of spin with this rubber is when a good amount of force is used to activate the sponge.
In conclusion, if you don’t want to use booster, don’t buy this rubber, you’ll be underwhelmed by it; just buy a Tensor ESN rubber instead, like G1, Rakza 9, Vega Pro, or DNA Platinum Medium. It’s not worth £90 unless you unlock its true potential with booster, like Dignics 09 °C or Hurricane 3 Neo (all versions). Lastly, don’t use this on a hard blade, it’s pointless. I have since boosted it, but I’m yet to play with it boosted!
#11 — October 2025
This is a new language for table tennis. Everything I say here is subjective, coming from a player who has played table tennis for 55 years. I have been coached and I have competed nationally and internationally. I have had extensive experience with Butterfly products, both in terms of blades and table tennis rubber. 12 years' experience playing with the Tenergy family of rubbers. 5 years' experience playing with the Dignics family of rubbers. Double-winged looper who plays close to the table. I find the rubber to be easy to use. In, against topspin, be mindful of your blade angle, perhaps close it a bit more. On the backhand, it is very easy to play with: to do banana flicks, strawberry flicks, loop, block, and smash. I find it easier to flick the ball than to push it. The rubber does everything well. I especially enjoy flat hitting with it. It definitely has an advantage over all the rubbers, whether they are Tenergy or Dignics. I find the rubber quite straightforward and easy to use. I think it’s user-friendly. You just have to have proper technique and have some feel for the ball. It does also depend a lot on what blade you put it on. I have it on my TB ALC, and it plays fine for me; it is not too fast. Other players in my club disagreed; they said it is very fast. So it really all depends on your level of skill and experience. My coach tried it today, and he was absolutely ripping these hypersonic loops at will, forehand and backhand, without any problems, generating tons of spin and speed, and the ball was definitely going very deep. Blocks are very, very solid; just be mindful of the angle. And I tried punch blocking, but that was a bit tricky—again, nothing to do with the rubber, it has everything to do with the user. I need to get used to it more. Highly recommended if you can afford the astronomical price, which I hope will come down soon.
#12 — October 2025
I love this rubber, but the price is just too expensive. Great with looping, and control is OK.
#13 — October 2025
The Butterfly Zyre 03 is a medium-soft (42°) rubber with an average weight, designed for players looking for a great balance between control, spin, and consistency. Its topsheet is grippy, offering excellent grip without being tacky, with a medium-high projection angle that facilitates safe, arcing topspins. It stands out for its above-average gearing, adapting to both the short game and powerful attacks. In addition, its durability is very high, maintaining performance for a long time. In short: a versatile, reliable, and stable rubber, ideal for those looking for security and spin without losing power.
Popular Butterfly rubbers
Get Notified of New Equipment and Reviews
༼ つ ◕_◕ ༽つ No spam or other useless stuff. We plan to send out some newsletters from time to time with the latest reviews and project updates. Feel free to unsubscribe at any time.

