Get Notified of New Equipment and Reviews
༼ つ ◕_◕ ༽つ No spam or other useless stuff. We plan to send out some newsletters from time to time with the latest reviews and project updates. Feel free to unsubscribe at any time.
Sticky 91 reviews
Special rubber
This special rubber is a great choice. It offers excellent control and spin, making it ideal for fire and backhand max shots. I’ve been using it with a Timo Boll t5000 frame and have been very impressed with its performance. It’s not too fast, even without boosting, and provides good attack capabilities. With some practice, players with good skills will find it very enjoyable to use.
The DHS Hurricane 3 is well-suited for all-round attack players who prioritize control. This rubber delivers consistent performance, giving players what they put into it. All the best. Ontregelaar.
I used this unboosted rubber on a Tibhar Stratus Power Wood for the forehand. It is a very good rubber for smashes and deep topspin. Additionally, it has an incredible blocking capacity.
It takes a bit of time to adjust to the low throw angle. However, when you adapt your technique, it becomes very effective. This type of rubber requires improvement in your technique, as it is not as forgiving as European rubbers.
In conclusion, this is a great rubber. I am interested in trying the other versions, such as the provincial one and some with a booster.
I’m from Malaysia. The Asian region dominates this sport. I have been using this rubber since 2017 and continue to use it today. For my forehand, I use DHS Hurricane 3 (H3) Red. For my backhand, I use 729 804 Anti-Spin Black. It’s crucial to remember that rubber alone is not the sole determinant of performance; skill is paramount. I’ve had my H3 rubber for a long time (2017-2022). With proper care, including rubber cleaner and occasional re-gluing, it’s still in relatively good condition (7.5/10). I’m still able to execute topspins, chops, and swings effectively with my H3. If you’re on a tight budget but need reliable rubber that will complement your abilities, I highly recommend it. Back in secondary school in 1997, I used Butterfly Tackifire, which belonged to the education department. Based on my experience, the classic Butterfly Tackifire has a similar feel to H3, reminding me of my contributions in the sport many years ago. It’s both effective and affordable.
This is a boosted rating. Everything is better by 30%. Of course, correct technique is needed to get the best out of this rubber.
I’ve been using this rubber for a while now. Two coats of Falco Long booster and you’ll never want to try other rubbers again. I use 40 degrees on the forehand and 38 on the backhand. Perfect on both sides. I gladly leave the tensor rubbers to those who have the arm for it.
I have been using this on my FH for at least 25 tournaments in the past 6 months. It’s been alright.
The commercial version of this rubber may not be suitable for most players without modifications. Its slow speed can be improved by using a booster, but this raises the question of why purchase this rubber when a faster option could be acquired directly.
This rubber demands a high level of technical proficiency in both game technique and physical attributes such as endurance and power. Players considering this rubber should be aware of the significant effort required to effectively utilize its defensive qualities. The notion that purchasing this rubber will instantly elevate one’s game to the level of the Chinese national team is unrealistic.
It’s not the fastest rubber I’ve used (and I’ve used about 10), but it’s super grippy, which helps a lot with its control. I always feel like the ball is slower than the pace of the game. The ball grabs the rubber and has a long dwell time, which helps you make some last-minute corrections when playing. The range of speed and spin that you get from this rubber is so wide that it’s probably suitable for all levels of players.
I’m reviewing this in 2.15mm at 41 degrees, with three layers of Haifu Seamoon booster. I have used this version before without booster and always felt that the H3N is a better choice.
I glued it on a DHS Power G5X ALC blade, and the weight uncut is 68g, so cut would be around 49-50g.
The boosting effect is really nice. I never thought that it would do that much. It now performs like a H3N, a little bit faster, a little bit softer, and a little more deadly.
For a spin/brush oriented game, I haven’t found anything better so far.
I’m currently also trying out XIOM TAU II and DHS Hurricane 8, 2.15mm, 40 degrees.
The TAU II has a similar feeling as the H3 boosted, but with H3 you get that kick when brush looping. The Tau II is a bit tamer that way.
The H8 comes quite close, but the feeling is harder, which doesn’t give you the control you get from H3.
To sum it up, this is really good rubber in all ways, but it needs the booster to come alive…
I’ve been using this rubber for about 3 months now, and here’s what I think.
The rubber has a nice and tacky finish, giving you lots of spin. It’s designed for forehand loop and control and is medium-hard with a 39-degree sponge. I recommend using it on the forehand.
The speed isn’t that great, so if you’re looking for something faster, consider Neo or Hurricane 8 instead.
Pros:
Cons:
This is a great first rubber. It has average speed, making it easier to try all strokes when practicing. However, there are mild variations of this rubber in the market, and it’s essential to avoid versions tuned to have high tension, as they are too fast for beginners.
Once you master returning difficult services, you can add high tension. This rubber is available with various sponge hardnesses, the most common being 39 degrees on the DHS scale. Harder rubbers will have a more dangerous top gear, but they require more accurately timed strokes because there is less dwell time.
Most hurricanes are very tacky when new to a point where the sheet can hold the ball upside down. This extreme tackiness fades quickly, and the bounce becomes more lively, but the sheet remains tacky and has enough grip to generate high spin even when old. You can extend the life of the rubber by removing dust regularly and covering the sheet with adhesive protective film when not in use.
High humidity reduces grip, which is true for all rubbers. However, it’s more noticeable with hurricanes because the loss of grip is more dramatic. The weight is normally around 43g, which is much lighter than Tenergy 05 for example. However, the hardest tuned sheets will be over 50g per sheet when cut to a typical size blade.
The great thing about this rubber is that you can keep using it as you become a better player. You just need to increase the hardness and use tuned versions. You won’t have to change your stroke because you are already used to playing with a hard rubber.
You can use this rubber on the backhand if you are strong, but you will have to whip the ball with your wrist in order to get similar speed as your forehand. Start with an all-round blade and keep it as long as possible. Work on your footwork and timing to increase speed instead of getting a fast blade because you will have better control overall. Even all-round blades have high speed in top gear when you use hard rubber.
FH Rubber Review
I love this FH rubber because it allows me to loop and loop kill. It’s tacky (sticky), so it’s great for learning to loop. Its linear and low throw angle make it good for looping.
After initially using Medium hardness for about 9 months, I decided to upgrade to Hard hardness. Testing for one session proved it gave more power to my loops. I use Hurricane 3 rubber for both BH and FH.
Blade
I have tried several blades and always put DHS 3 on FH and BH. This is the best way to test and compare blades with the same rubber.
The NEO version is much better than this. There are about 200 different rubbers just like this. Nothing particularly good in any areas.
D.
I think this rubber isn’t good. It seemed to handle a piece of cake when glued in max on a Donic Carbotox fl on forehand. However, if you put it on a plain and just leave the ball upon it, you’ll see the ball almost has no rebound. I tried another in 1.8 and it’s probably better if you hit the ball hard as you’ll have a better control.
After playing with Hurricane 3 for almost a year, I have become very used to forehand looping with it. However, this rubber is not without flaws, having its own set of limitations and drawbacks. Despite this, I have noticed some misconceptions about this rubber based on the reviews many people leave. I would like to clarify these misconceptions for those who are considering trying out H3.
Many first-time users tend to complain about this rubber being slow, but this is not true. This rubber has a wide range of gears. Don’t let the tackiness deceive you. If you use full-body swings, you will discover this rubber’s high gear. Your loops will be fast and loaded with topspin. I promise your loops will be on par with tensor rubbers if you use the correct technique.
The second misconception is about the durability of this rubber. It’s true that H3 is not a very durable rubber by any standards. At most, I would rate it as having medium durability. However, the tackiness does not fade away as quickly as many people suggest. You have to take proper care of the rubber to maintain its tackiness. Clean it with a bit of water (occasionally use rubber cleaning fluid; any brand will do. I use Tibhar VOC-free rubber cleaning fluid) and sponge after each play session. This will allow you to keep the tackiness for the entire lifespan of the rubber’s topsheet. If you are a recreational player like me (3 to 4 play sessions per week, about 3 hours per session), a typical sheet of H3 should last you 4 to 5 months on the forehand. If you use H3 on your backhand, it should last even longer.
Finally, this rubber is not forgiving on mistakes because it has a hard topsheet and a low throw angle. So don’t expect to pick it up and be used to it right away if you are not familiar with tacky Chinese rubbers. It will take a month or two for first-time users to get used to it.
I hope this review will be of some help to anyone using H3 or considering trying it out. Happy playing!
A very good Chinese rubber suitable for all levels. It provides excellent spin and fast loops, yet it maintains good control. However, do not be misled by its tackiness. Overall, it deserves a 9/10 rating.
Review of Table Tennis Rubber
Initial Impressions
I mounted this rubber on a Stiga Allround blade and immediately applied Falco Tempo Long Booster. As such, I have no experience playing with the rubber without tuning it.
Performance
Despite being mounted on an all-around blade, the rubber is exceptionally fast. Without applying spin, the ball often flies long. It is not well-suited for hitting and is best suited for spin-oriented play.
The rubber requires a high level of technique to play effectively. While it produces excellent spin, the player must generate it independently. Additionally, it demands regular tuning, approximately once per month, depending on usage frequency.
Positive Attributes
Despite its demanding nature, I greatly enjoy this rubber. Its hard sponge provides excellent control during pushes. It also maintains control during high-speed shots, producing spinny and fast returns.
Recommendation
This rubber is suitable for loop-oriented players with strong physical fitness and excellent technique, similar to Chinese players. I recommend using it with a 2.15mm sponge.
Conclusion
For those seeking intense looping and powerful hitting, this rubber is a worthy choice. Enjoy the thrill of controlled looping and hard-hitting!
Review
Date: 4 MARCH, 2018
Color: Red (max thickness)
Appearance: Beautiful and high-quality looking rubber with a surface that appears to be of high quality.
Performance:
Review:
I tried this rubber on an epoxy from Donic. It’s very tacky, and the ball stays glued to the rubber for several seconds. It’s also very hard, which is destabilizing at first. After a bit of time to adapt, I was able to control it better. It has a high throw angle, making it easy to reach the back of the table. You can achieve powerful loops and topspins with this rubber, imparting insane spin on your serves. It’s also effective when receiving short serves just behind the net.
However, there are some drawbacks. You need to be well-positioned and hit the ball with the correct timing, or you’ll make errors. It’s not suitable for flat gameplay (flat hits, blocking, smashes). You always need to impart spin. And finally, it’s impossible to finish a rally with this rubber. For example, I was playing with my friend, and after a long rally, I hit a deep topspin to his backhand. He was out of position, and it opened up the forehand side for me. So I hit a powerful topspin to the short side that would have been decisive with a less tacky rubber. But he had enough time to return the ball! So it lacks speed.
In conclusion, this rubber is not suitable for beginners or high-level power players. It’s best suited for those who overboost.
Nice rubber.
H3 Rubber Review
Pros:
Cons:
Specific Considerations:
Excellent rubber at a low price. It is perfect for practice.
I have used this rubber for forehand for about a year, and yes - its tackiness has worn out a little but not extremely significantly. I am a looper and this rubber is perfect; it gives amazing speed in mid distance and is great for all levels of players. It is also pretty hard so you shouldn’t really use it for backhand. It doesn’t have as long dwell time than European rubbers but it is good on a flexy/allround blade.
This rubber outperforms DHS Hurricane 3 Neo. However, it is important to note that generating spin with this rubber requires more power. It excels in chopping and serving techniques.
Very high-quality rubber from DHS. Works great for a power offensive game, and provides great spin on loops. Surprisingly, I also found it to be a terrific rubber to chop with on the backhand. The tackiness enhances spin serves. To preserve the tackiness of the top sheet, I always washed the rubber with water and used a plastic cover after every game. Based on my experience to date, it performs best on Clipper-type wood blades.
Hurricane 3 Series Review
Numerous reviews have been written about the Hurricane 3 Series, which features a tacky surface and hard sponge/topsheet. Consequently, the general consensus is that it’s too slow for higher levels of play unless boosted. This review will primarily compare boosted H3 provincial (3 layers Falco Tempo Long) with Tenergy 05 on the forehand.
Both my boosted H3 and T05 are adhered to 5-ply wood blades for forehand play. For looping, T05 remains faster and much bouncier with a higher throw angle. However, H3 generates more spin and speed when played with a faster stroke. Conversely, T05 may go off the table with the same stroke.
H3 requires faster arm speed to avoid sacrificing speed for spin. Additionally, the topsheet is highly susceptible to oil and humidity, so it’s essential to be cautious to prevent the ball from sliding off the paddle.
Both T05 and H3 offer good touch, but H3 makes it easier to execute short and low serves/receives. While H3 may produce slightly more spin on the serve, it’s also more sensitive to spin on the receive. Used effectively, H3 possesses greater potential for serves and receives.
Overall, even after boosting, this rubber remains more spin-oriented than speed-oriented. Both T05 and H3 excel as monstrous forehand looping rubbers. This rubber should be considered if you possess strength and prefer swinging big on the forehand with proper technique. Modern tensor rubbers offer a different stroke but are equally effective. I advise players to experiment with both types to gain a comprehensive understanding. Moreover, H3 is considerably more dependent on the blade choice than Tenergy. A suitably flexible blade is crucial for H3 to maintain maneuverability and tactile feedback.
I was blown away by how light the rubber is, weighing only 43 grams when cut to my 157x150 mm test blade. I have heard and read everywhere that the Hurricane 3 rubbers are supposed to be so heavy. Not the case! In fact, I have only tested two inverted rubbers that weigh less than the regular Hurricane 3, namely the drastically softer Gewo Proton Neo 325 and 375!
The response on FH drives is surprisingly non-metallic for an unboosted Chinese rubber. FH loops felt far less “Chinese” than I expected. Sure, the throw angle is medium at best and loops are best played with considerable wrist action and a big swing. However, engagement of the wrist also results in a unique arc, in which the ball dips shortly behind the net, resulting in a distracting kick off the bounce.
Read the full review on this link: http://blog.tabletennis11.com/dhs-hurricane3-neo-3-50-provincial-review.
Hurricane 3 features an extraordinarily hard orange sponge, necessitating a full brush stroke for effective ball handling. Otherwise, the ball tends to rebound weakly into the net. The rigid sponge also diminishes the player’s perception of the ball, which may be acceptable to those who prioritize spin over tactile feedback.
Regarding its performance, Hurricane 3 exhibits moderate speed, and while chops are feasible at various skill levels, the rubber’s overall sluggishness can lead to occasional net errors during pushes. However, skilled players can generate exceptional spin with this rubber, although passive strokes may result in minimal spin.
Efficient utilization of Hurricane 3 demands rapid arm speed. While this may initially present a challenge, it can ultimately refine one’s technique, making subsequent rubber transitions feel more accessible and user-friendly.
Enjoy your table tennis journey!
Traditional Chinese rubber is tacky, hard, slow, heavy, and produces a strong spin. The resulting arc is low, making it suitable for serves and short gameplay.
Not impressed with the rubber, mainly due to its lack of speed for my offensive style. Otherwise, the rubber performs well on various things, particularly close to the table play.
Review
Update
After using this rubber consistently for about a year, I noticed the tackiness faded quickly. Consequently, the spin has noticeably dropped. It remains a great beginner rubber, but I recommend the Donic Baracuda or Yasaka Mark V for my next forehand sheet. I recommend the H3 for players with some experience looking to improve their game. If played with more than a few times a week, it will need to be replaced within a few months, which is sufficient time to develop skills and upgrade from basic rubber sheets.
Initial Impressions
I received this item over the weekend and have used it several times since then. Initially, the rubber was tacky, but not as tacky as I had anticipated based on online reviews. The rubber is heavy, requiring a significant amount of effort to generate spin and quickness.
I favor a heavy topspin and looping game, and this rubber complements that style well. Over time, I anticipate a noticeable increase in speed and spin as I acclimate to the new rubber.
Overall, I recommend it for anyone with strong, quick topspin/looping shots and game. It also performs well with pushes and short game shots.
This was my starting rubber on my first bat (a pre-made DHS A5002). At first, I thought it was quite spinny and fast. However, after a few weeks or months of playing, I broke into the rubber and found that the spin was above average but not amazing, and the speed was mainly due to my efforts.
It has lasted me a year—I’m moving onto a custom-made soon—and it has remained its “new” feel but has lost lots of tackiness. Because of the sponge hardness, the dwell time is decreased.
I would recommend this to beginners that have a good understanding of basic offensive and defensive play as there is a lot of technique required for good shots that win points. You need the right key to unlock the beast’s cage, ha ha! Do not buy the pre-made with this rubber as the blade is heavy and won’t give the rubber its full ability.
Sponge is too hard. However, it is a rubber that I would buy again.
The grip of Hurricane Long 5 rubbers is definitely better than NEO H3. NEO H3 is not very grippy and it feels like the ball is slipping on the surface of the rubber. Hurricane Long 5, on the other hand, has a very grippy surface that allows you to control the ball much better.
Just tried today, seeking chop and loop rubber for Def Alpha, to replace my Tackiness Chop 2.
Because the 1.5 mm one was impossible to find, I bought the 2.15 mm, and tried it for a couple of games first before shaving it to 1.5 mm later if I’m not lazy.
This initial review is from “wall” training, and I will update when I have played a couple of games.
This rubber isn’t as fast as I imagined based on this site, even slower than my Tack 2 1.9 mm on brushing, but,
On a flat hit, there is a loud “tink! / tick!” sound and the ball launches a lot faster. ??? I do need some explanation, because this is new for me.
The spin it generates on chop is less than Tack 2. Not much difference with my Dr. Evil.
On loop, the arc is much smaller than Tack 2.
Overall control is similar to Tack 2, but it feels mushier.
This is a good chopper rubber by today’s standards in my humble opinion.
UPDATE
Been using it long enough, I am glad I didn’t thin the sponge.
This rubber gave me something that I lacked before, loop. Very much easier than Tack 2.
UPDATE 2
In short, I changed my mind and shaved the sponge to 2.0 mm. If not enough, I will shave it further to 1.5 mm.
After finding worthy opponents to explore the rubber’s capabilities, I realized this rubber is the worst on blocking due to either super high or super low throw (very spin reactive), so I can no longer lazily reach and block any ball. I should actively chop it. Thankfully, the return is just as dangerous, very flat, deep, and heavy in spin, enough to kill amateurs.
It can quickly kill your enemy, especially when your service is so tricky and fast.
Good for topspin, counter attacking, serving, and smashing. However, the top sheet is too hard. Overall, it is good for the price but I would recommend the neo version for more control.
It’s good close to the table, but for far, you need to add a lot of power to get the ball across. I use it on my FH and Tennergy 05 on the BH.
It’s tacky and gives excellent spin.
This was a generally good rubber for me (I am an all-around offensive player). The tacky Chinese rubber made it good for spins, yet it still was a decent topspin looper. It could still be better at flat kill shots, though. Overall, it is a good offensive rubber, but there are better ones out there for similar prices.
I have been playing with H3 for two months and have learned a lot during that time. I use a modern defense style with a Chen Weixin blade and TSP pr1 LP on my backhand. With the H3, I find that my short game is very stable, and I can execute both long and short pushes at will after some training. It offers a lot of gears, which is also true for looping. It performs best when using a closed racket for looping due to its high throw. I also play more in the Chinese looping style. I chop and fish far from the table to vary my defense returns. It complements my LP very well, and I highly recommend it.
I am sure after using this rubber with the combination of Yasaka Anti-Power, you will see great results. This rubber has outstanding spin. It is good for chopping and blocking. It is very good for control and smash. After using this rubber, I won a gold medal in the Indian Veteran Nationals 2013 held at Srinagar.
This rubber lacks power and spin. For power, consider the Tenergry series or Donic Bluefire. For spin, Adidas P7 and the Tenergry series are recommended.
I tried this rubber on the Stiga Clipperwood blade. My first impressions were that it was very slow and hard to get used to because of the hard sponge. However, after an hour or two of training, I got used to it.
This is a very durable rubber and also extremely tacky. However, it is way too heavy for me and is more suited for loopers or counter-hitters. It has a lot of spin and control but lacks speed, and requires a lot of effort to use.
Overall, it is a good rubber for the price.
I have the commercial version. It has good spin and is very durable. It does not lose its tackiness for a while. To restore it, use some olive oil, brush the rubber, and let it soak in. It replenishes it, but don’t expect it to be brand new.
Empecé jugando en el trabajo con una Sensei 3*. Después me inscribí en un club y me compré un madero DHS wind CW-W carbon. Tenía dos DHS H3 en el madero.
En un principio me dio resultado: tenía control por el thacky, usaba mucho los cortes de ambos lados y golpes planos fuertes para rematar de drive. Pero a medida que pasaba el tiempo, la goma iba perdiendo sus propiedades.
Una vez que se volvía vieja, no es que fuera mala, era buena, pero solo me duraba dos partidos y la debía limpiar para volver a tener el thacky. Me costaba mucho topear con esa goma de drive, aunque haber comprado un madero ofensivo tampoco ayudaba.
Después de un mes de fallar el 80% de los tops, me cambié la goma de drive por una Acuda S3, que hizo que aprendiera realmente las técnicas de rosar. Los top empezaron a salir. Yo tengo brazos largos y tenía que hacer tops con todo el brazo, y la S3 me pareció mejor.
La H3 es una buena goma y muy barata, pero a mí me costaba muchísimo meter bien las técnicas. Es difícil de usar si no eres un chino que la usa 10 horas al día.
I use them on the Palio TC6 for FH. At first, it seemed quite dead to me and I took 40°, which seemed to me like it should be soft. However, the sponge and rubber are terribly hard and I don’t like it, but in the game, it behaves quite differently. The rubber is relatively fast, not quite as much as I expected, but still, solidly fast. The control is also OK, but the spin is excellent.
Not the best rubber in the world, far slower than T05, T64, and T80.
It has less spin than all three (except on serves, where it is somewhat equal to T64). Not bad for looping close to the table, but if you’re used to catapulting and not pushing forward, distance loops may seem awkward.
The speed of the rubber is hard to keep consistent because of the gears. If you push too slow on the short game, the ball won’t move, but if you push too hard, it may fly off the table.
It’s not going to take away much from your game, but if you aren’t used to Chinese rubbers, it may take a while (especially if you’re used to Tenergy). It isn’t awful. Give it a shot if you aren’t into tensors and spring sponge rubbers.
Not a bad rubber, if you are wanting to slow loop it’s quite a decent rubber. However, this rubber is way too hard for me.
I was going to use this on my forehand looking at it, but then I tested it. I found that it suits my backhand for drives, blocks, and chops better.
It’s not a very quality rubber if you are wanting to forehand topspin. The rubber is very hard and solid on my Butterfly Offensive blade.
This rubber possesses remarkable power and speed, but it requires a skilled stroke to unleash its full potential. Regular looping alone will not suffice.
Where this rubber truly shines is in loopdriving and loopkilling. It demands an assertive stroke, but the payoff is substantial.
Despite its formidable power, the rubber offers superb control. With confidence, players can execute bold strokes and effortlessly counter incoming balls.
I’ve tried this rubber with an orange sponge of 39°, 2.2 mm from Eacheng. It isn’t heavy and offers a perfect balance between spin, speed, and control.
The most interesting thing I’ve noticed is that this rubber is easy to control, making it suitable for beginners. Additionally, it is incredibly efficient for looping, giving players an advantage in this technique.
Very good rubber for backhand.
Not too much speed and bounce.
Review text:
for prize very nice!!.
This rubber is very good for counterlooping from the table. I usually block incoming spin, but now I have enough control to counterloop 9 out of 10 times. Before, I could only do it 2 out of 10 times with Hurricane 2.
Sorry for my bad English.
Its nice* to compare with Acuda S2 speed 8.7 spin 8.5 control 8.5 throw angle medium high. Hurricane is slower at 7.7, but for looping 8.3 it’s better and counterlooping 9.1 it’s a lot faster than Acuda, and that’s its strongest spot.
Loops are nice, with more control at 8.9. Counter hits are it’s weak spot with a throw angle of medium low. If you want to use this rubber you must have a big swing, Chinese style loop. Euro loopers will have a problem to adopt. You can also chop, use it with DHS bats like Deeper D-02.
The rubber is hard, but there is no power.
I agree with some reviews that this rubber is slower than advertised, however, all the spin makes up for it. The sheet is very tacky and it just picks up the ball. Serving with it will cause a lot of problems for your opponent.
I play penhold, Chinese with RPB. The only thing I didn’t like about this rubber is when I move to half distance to start looping, it seems that it loses power. I think it’s because of the sponge, which is really hard. Top players who use H3 definitely don’t play on this sponge; they play on provincial (blue) sponge.
All in all, it’s good rubber for 3rd ball attacks and opening loops, and very good for chopping. Control is amazing with this rubber. If you like close to the table, spin over speed-oriented game, this rubber is for you.
Good to learn the basic Chinese strokes with. One good technique is established though. I would switch to one of the neo rubbers for more speed because of lack of speed (i.e. way too much effort).
Advantages:
Disadvantages:
Recommended use:
Pair with a light and fast blade.
Personal preference:
I prefer faster rubbers, especially on the forehand side. Specifically, I like the Friendship 729 OEM 2.10 mm, 729-5, 729-8, Globe 999 National Red, and Reactor.
Future plans:
I am planning to try the Hurricane 3 Provincial soon. I am curious to see if there is a significant difference, aside from the quality.
Hurricane 3 is widely regarded as one of the top table tennis rubbers in the world. It offers excellent tackiness without being overly sticky like H2. This balance between tackiness, control, and speed makes it a versatile option.
Hurricane 3 employs a medium-hard sponge, providing a forgiving feel for players with varying strengths. It excels in a wide range of techniques, including looping, chopping, and blocking.
One drawback of Hurricane 3 is its durability. The extraordinary grip tends to diminish over time if not properly maintained. To mitigate this issue, consider purchasing the provincial version, which is less prone to grip loss. Overall, Hurricane 3 is an exceptional rubber that delivers consistent performance and versatility.
Fast! But it’s a little bit hard to control. As a result, I haven’t pulled out my fullest power just to make sure the ball is in play. But overall satisfaction is the word, and it met my expectation as well.
The sponge is as hard as a rock. It feels like I’m playing with a brick.
Review text:
BS98 says:
I use a DHS H3 before, and it is rather heavy. It has moderate speed, good control, and quite “OK” spin. Its sponge is quite heavy too.
This rubber sucks overall on serves.
It is the most popular rubber used here in Brunei Darussalam. It performs very well when used on the forehand (FH). My students have won many matches here in Brunei using it. Overall, it’s a very good rubber if you are looking for a good game.
Durability:
Extremely heavy, so you should use them with a lighter blade. Speed didn’t suffer. I was experiencing some minor control issues, but that’s coming off a very forgiving blade/rubber combination, so I think they will go away as I get to play with H3 a bit more.
Maintenance:
I’ve put in some significant hours of play with it, and it’s still maintaining its durability. The only maintenance that I’ve done was wipe it down with a slightly damp microfiber rag, at least between play sessions, and once or twice within a play session when I go to a very dusty gym.
Overall Impression:
While I’m VERY satisfied with the characteristics (great for developing all around play), I’ll probably switch to something lighter when the time comes to replace my H3’s.
I used DHS H3 for about 1.5 years.
The Good:
The Bad:
Very good rubber.
Blocking is a little weak, could be my blade’s issue.
A lot of spin and good control.
I had just bought this rubber last week without knowing the rubber. But I found out that Hurricane 3 is very good for offensive players like me. I needed a rubber that has great control. Even though my smashes are not very strong, I can manage controlling the ball. However, if my rival hits back a smash, I can still hit back because of its control while blocking or even chopping. I’m lucky to have this rubber because I have a great time with it. For me, it’s more unusual than other rubbers. So people, think about it. If you try it, you’ll love it. Nobody can deny it.
I have this in black 2.2mm on a Yinhe T-8 Off blade.
I have read many reports saying that this is a “rubbish” FH short close to the table rubber.
I play a mid-distance game and this rubber performs very well. I hit chop and block on my BH and this rubber does it all.
I can play short at the table chops and blocks with the added control. I can also play fast topspins or loops.
I would like to see this rubber in a 1.8mm version. Does it exist?
I have had mine for around 2 years, I clean it regularly, and it still has its tackiness. It lifts the balls around 2 feet before dropping.
The rubber topsheet still looks like new, very hard to mark. By far the best DHS rubber I have used, no faults… I am looking to try this in other forms.
This is a great rubber to use for your backhand. It is fast, very controllable (for a hard sponge rubber), and has a lot of spin.
DHS H3 is a fast, controllable rubber with a significant amount of spin. I would categorize it as an all-round rubber. Its combination of high speed, spin, and control makes it a suitable choice for all-round or offensive blades.
Starts out slow, then gets faster.
I find the DHS Hurricane 3 (H3) very slow when smashing compared to the other rubbers in the DHS family. However, the spin in the rubber is slightly more than average rubbers because it is more tacky, which also makes the throw angle slightly higher. The rubber thus lets you give more spin to your serve and loops.
Despite being a hard rubber, the H3 is surprisingly manageable if playing for around an hour. However, this rubber is not recommended for beginners still learning how to loop as I find the rubber more tacky than the normal rubbers typically found in the market.
DHS Hurricane 3 is an exceptional rubber for defensive play. It offers outstanding reliability for blocking and chopping techniques.
Furthermore, its speed is commendable, granting players precise control over the ball. I highly recommend this rubber to my brother and friends in Ginatilan.
This rubber is excellent for control and defensive shots, which is why I use it on my backhand.
I’m using this rubber in Red 2.2mm sponge for my forehand with Friendship 755 1.0mm sponge LP on a slower Butterfly blade. My friend gave me a slightly used rubber. I applied a little bit of Kinetix Rubber Revitalizer (Amazing Stuff!!!) spray before playing to bring back some tack.
The top sheet is pretty tacky and helps a lot with serves and close-to-table pushes and chops with good backspin. It had pretty decent hitting efficiency, slightly affected by the opponent’s spin. Brush looping was very effective, and loop driving was very easy away from the table. Counter-looping was amazing away from the table with a lot of spin and speed. This is a very good all-around rubber which excels at almost everything.
This fantastic rubber is ideal for loops and chops.
The Hurricane 3 (H3) shares some similarities with the Hurricane 2 (H2), but also possesses distinct differences. Notably, the H3 generates significantly less spin than the H2, although it still offers good spin capabilities.
The strength of the H3 lies in its exceptional control, which surpasses that of the H2. This was a deliberate design choice, aiming to mimic the H2’s performance with a more control-oriented playing style. In my personal experience, the H3 exhibits greater smashing ability but slightly reduced looping capabilities compared to the H2, likely attributed to its lower spin. However, I find that the H3 excels in deflection, making it ideal for blocking and counterdriving. It is best played close to the table.
Despite having explored numerous other rubbers, including several from DHS, the H3 remains one of my favorites. I highly recommend it to players of all skill levels.
UPDATE: The H3 offers remarkable control for a hard rubber.
This rubber is the best choice for my blade. If looping is your game, you will love this rubber. It has excellent control, great spin, and speed is out of this world. It’s a perfect 10.
The H3 commercial version is not very tacky. 729 SP is a lot tackier and softer feeling. It’s a slow rubber that is ONLY for short game. Even a few steps back from the table might get you in trouble.
Speed glue can make this rubber very nice, but without speed glue it’s a rock with no power and average spin.
H3 commercial unglued, I recommend to a beginner close to table penhold player. But these days, there are lots of rubbers with built in effects, so think twice about getting this, or at least get provincial version.
This rubber is similar to Hurricane 2, but slightly slower. It offers a higher throw and better control, making it ideal for driving shots.
I use the Provincial H3, CTE tuned. It’s an excellent forehand rubber that excels in producing spinny serves and looping heavy backspins. Blocks tend to kick higher due to the tacky rubber, but they remain easily controlled.
I, too, have the Provincial. This is a nice control/spin rubber. The speed is moderate. The one thing I don’t like about this rubber is its weight. It would be nicer if it were lighter.
The H3 is one of the most used rubbers in the world. It’s an industry standard; yet, I think most ratings are way off. For example, it’s not that fast, it has good control, and it blocks and chops well. Most would agree it’s excellent with spin, which makes for some tricky serves.
All in all, it’s hard to ignore the fact that it’s too heavy, the sponge is too hard, and each sheet seems different. Many of the negatives can be remedied by buying the H3-Provincial, which is a nice rubber… but still too heavy!
This rubber offers the best value for money among those I have tried. It’s exceptionally good.
Those who claim it’s slow lack the technique for forceful play. It’s fast if you flick it swiftly.
The spin is remarkable. I used this after the Butterfly Rozena on the same blade, and there is no comparison. DHS surpasses it in all aspects.
However, I also used the Nittaku Fastarc G1 on the same blade, and it outperforms the DHS rubber. However, it comes at nearly double the price.
Nittaku offers greater control than DHS and Rozena. Moreover, it is faster, spinnier, etc. It’s simply a superior rubber. Period.
If you’re on a budget, the DHS is a no-brainer. It’s the best value for money by far.
༼ つ ◕_◕ ༽つ No spam or other useless stuff. We plan to send out some newsletters from time to time with the latest reviews and project updates. Feel free to unsubscribe at any time.